In the U.S., we're lucky to live in one of the largest and most geographically varied countries in the world. Taken as a whole, it's a fisher's paradise. We have huge rivers, mountain streams, huge lakes, small lakes, saltwater lakes, and, of course, thousands of miles of diverse coastline. Practically every coastal region in the country has its own unique fishing opportunities, but there are some that really stand out. Here are just a few examples.

The Florida Keys: The great thing about these islands off the southern coast of Florida is that they allow travelers to leap at intervals into the Gulf of Mexico, getting gradually further and further from the mainland. Essentially, what this does is take you through several different Gulf ecosystems, all great for saltwater fishing. By the time you get out to Key West, you're surrounded by hundreds of miles of untrammeled open waters.

Sure, there are shallows around the islands, but if you take a boat out a couple dozen miles, you get into real deep territory. Here, you can catch everything from Tuna, to Snappers, to Mackerels to Marlins-so bring your sturdiest fishing equipment.

Washington state: Washington state is full of freshwater lakes and rivers that offer plenty of great fishing. But if you're into saltwater fishing, the western part of the state is as good as it gets. In the gorgeous Puget Sound, you can catch halibut, cod, salmon, and flounder, all within a day's trip from Seattle.

Louisiana: The coastal area around where the mighty Mississippi River drains into the Gulf of Mexico is one of the top fishing regions in the world. Trawl the shallow bays and the Breton Sound for hearty fish like speckled trout, sheepshead, black drums, and huge bull redfish. And don't forget Lank Pontchartrain, just north of New Orleans. This saltwater lake is connected to the Gulf by an 8-mile-long strip of water called the Rigolets, allowing all types of saltwater creatures to make their way in. You never know what'll catch there.

North Carolina: The Outer Banks of North Carolina are a long strip of narrow islands that run down the coast, up to a 100 miles off shore in some places. The fishing on the ocean side of the islands is phenomenal, but it still doesn't come close to the Pamlico Sound on the other side.

The Pamlico's calm, warm waters make it a perfect breeding ground for all different types of fish. Sail a few miles out, and you'll have seemingly unlimited access to red and black drums, trout, flounder, kingfish, mackerel, sea bass, cobia, and lots of others. And when you're done, head over to the eastern side of the Outer Banks for a whole different experience.

Southern California: The entire California coast is fertile ground for fishing, but the area around San Diego is particularly fishing-friendly, with albacore, white sea bass, marlins, and some of the biggest bass you've ever seen. The fishing scene in the San Diego area thrives year round, with countless contractors ready and willing to take you out for fishing adventures in the bright Pacific sun.

Salt water fishing is a topic as big as the sea. It can run the gamut from angling for smaller inshore species like speckled trout, flounder and redfish, to an offshore adventure in search of pelagic giants like bluefin tuna and blue marlin. Since the inshore species are more accessible to anglers, here are a few tips to help in the search for a good catch. And just to narrow down the field even more, the tips given here will be geared more toward the beginning surf fisherman. However, these salt water fishing tips will put any beginner on the path to becoming a pro.

First, in order to catch a fish the bait has to be placed where the fish lives and feeds. This may be as simple as tossing a baited hook into the surf, which will often produce great results. But not all fishing spots are created equally. Any given stretch of beach will have certain areas that hold more fish than others. It is best if the angler can invest the time to survey the area he plans to fish at low tide, as this condition often reveals subtle dips in the bottom, deeper holes, sandbars, and other structures that will hold fish.

If it is not possible to survey the beach at low tide before fishing, at least take a few minutes to study the patterns of the incoming surf before you cast your rod. Waves that break far from the water's edge usually mean shallow water, and at times waves may be seen breaking on a sandbar many yards from shore. In contrast, if the surf rushes in and the waves break closer in one area than in another it usually means that the area is deeper than its surroundings. It is important to pay close attention since fish usually congregate around some type of underwater structure or area of depth change.

One mistake that I have seen many fishermen make is to try and send their bait as far as possible with every cast. At times this does pay off, but many times there are plenty of fish to be caught within a few yards of the sand, right in the foam. It is best to fish with multiple rods and cast various distances from shore until the fish are found.

Expensive, oversized tackle is not a necessity. Any decent quality rod and reels combination in medium to medium-heavy is perfectly acceptable. A simple bottom fishing rig of two or three drop lines tipped with size six hooks, and with enough weight to keep the rig on the bottom attached to the terminal end, will catch most species that live in the surf. Always remember that if you want to catch large numbers of fish you can catch a big fish on a small hook. But you can't catch a small fish on a big hook.

For the beginner, it is best to fish with natural bait. This means practically anything that the fish in your area might be feeding on. Small pieces of shelled shrimp, worms, the meat from clams, small pieces of squid, and cut fish are just a few of the best baits.

The best time of year for saltwater fishing is the time that you can do it. Except in the coldest months of winter you can usually find something to catch. There's only one sure way to be successful as a fisherman, and that's to get out there and wet a hook. The only sure way to fail is to never try. So get out there and give it a try, you never know what you might catch.

For some, fishing is another fun-filled sea sports; but some are just passionate about the activity of braving the harsh and hostile sea waves to chase the ever-elusive school of fishes in their used fishing boat. For some, fishing expeditions are great way of unwinding with family. Whatever may be your inspiration for tempting the fishes with baits from dawn to dusk, for the most exquisite fishing experience, you must have your own fishing boat.

Just like the nervous customer, who is going to buy his own vehicle for the first time, the fishing enthusiasts are also in great dilemma regarding the choice between a new fishing boat and a used fishing boat. Again just like the cars, the new and used fishing boats come with their respective virtues and short comings.

As for example, with the new fishing boat, you get the warranty to fall back upon in case of any trouble. Also you can get right onto the sea without the headache of any restoration or repairing tasks.

But, used fishing boats have their advantages too and that relates straight to the price factor; you get a used boat at half the price of a new one. Then by handling a pre-owned boat first, you will learn it hard way what to do with your boat while at sea and what not to do. This experience will help in matured handling as you finally get yourself a new fishing boat.

However, you should take the following precautions before you buy used fishing boats.

Comparison shopping

Visit various fishing boats sites and boat shows to have a glimpse of what is on offer. Compare prices and features of the used fishing boats on offer. Consult this resource before buying the boat finally.

Expert checking

You can buy your used fishing boats from local dealer, from online shops or from the newspaper classifieds. Wherever you buy your boat from, make it sure to have a last round of checking by an expert. There are many agencies that offer such services for around $8-$10 per linear foot. Sometimes there are mechanical defects that only an expert can detect. These kinds of surveys involve a thorough examination of every part of the boat including the engine to haul. The survey analysis sets you on a better footing of bargains; you can ask the owner to lower the prices, you can also opt out from the deal altogether if the report is not that favorable. On the other hand, the report makes it clear for you how much money you have to invest on the used fishing boats in future for the repairing and restoration of the parts.